Built With
| lowinertia |
Vaanika Singla
Electrical Engineering Student & Electronics Lead
New Brunswick, NJ
ABOUT ME
I'm an Electrical Engineering student at Rutgers University who enjoys working on hands-on projects. Most of my experience is in PCB design and power electronics, but my first love was mechanical design! My goal is to be part of projects that will make a positive impact on people for years to come. If you have something interesting to work on, reach out :)
Charge Control PCB and Charge Cart
Problem: Designed a PCB to emulate the handshake protocol for the J1772 charging port and then switch to communicate with the battery management system. Integrated, wired, and tested the PCB with the rest of the charge cart.
Constraints: Adhere to...
Wiring
LTSpice
Soldering
Crimping
Breadboarding
Troubleshooting
Altium Designer
EMI Testing and Troubleshooting
Problem: Designed a series of tests to isolate the source of noise in a system. Based on these tests, filtering and EMI mitigation techniques were implemented to reduce noise by 90%.
Constraints: Must fix this issue by the end of the calendar year....
EMI
Oscilloscopes
DCDC Converters
Power Supplies
Power Electronics
DIfferential Probe
Digital Signal Analyzer
Sensor and PCB Integration on an Electric Vehicle
Integrated multiple PCBs and sensors onto the vehicle, focusing on power distribution, system bring-up, and debugging non-functional hardware in a real racing environment.
Sensor integration
Hardware debugging
Design Presentation
Root cause analysis
PCB rework and validation
Power distribution and wiring
Embedded systems debugging (Arduino-based systems)
High Voltage Indicator Light PCB
Update the schematic and PCB to prevent overheating of the linear regulators while maintaining the location of the holes and the LED.
PCB Layout
Altium Designer
Thermal Management
Design Rule Checking
Copper Pour Optimization
Toy Airplane With Spinning Propeller
Designed and built a toy airplane with a spinning propeller using CAD tools in OnShape, and 3D printed the body for the model.
CAD
Onshape
3D Printing
Electronics Integration